//实现:通过静态路由实现网络的连通性。
//环境:
Router01
Router02
CISCO 2960-01
CISCO 2960-02
PC01
PC02
//拓扑:如图(110422-路由器静态路由配置)
//配置Router01
Router01>enable
Router01#configure terminal
Router01(config)#interface fastEthernet 1/0
Router01(config-if)#no shutdown
Router01(config-if)#ip address 192.168.1.1 255.255.255.0
Router01(config-if)#exit
Router01(config)#interface serial 2/0
Router01(config-if)#ip address 192.168.3.1 255.255.255.0
Router01(config-if)#clock rate 64000 //配置时钟频率
Router01(config-if)#no shutdown
Router01#configure terminal
Router01(config)#ip route 192.168.2.0 255.255.255.0 192.168.3.2 //静态路由配置(目标网段,下一跳地址)
Router01#show ip route //查看路由表
Router01#write
//配置Router02
Router02>enable
Router02#configure terminal
Router02(config)#interface fastEthernet 1/0
Router02(config-if)#no shutdown
Router02(config-if)#ip address 192.168.2.1 255.255.255.0
Router02(config-if)#exit
Router02(config)#interface serial 2/0
Router02(config-if)#ip address 192.168.3.1 255.255.255.0
Router02(config-if)#no shutdown
Router02#configure terminal
Router02(config)#ip route 192.168.1.0 255.255.255.0 192.168.3.1
Router02#write
//测试:(终端计算机)
PC01>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=7ms TTL=255
Ping statistics for 192.168.1.1:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 7ms, Maximum = 7ms, Average = 7ms
Control-C
PC01>ping 192.168.3.1
Pinging 192.168.3.1 with 32 bytes of data:
Reply from 192.168.3.1: bytes=32 time=13ms TTL=255
Ping statistics for 192.168.3.1:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 13ms, Maximum = 13ms, Average = 13ms
Control-C
PC01>ping 192.168.3.2
Pinging 192.168.3.2 with 32 bytes of data:
Reply from 192.168.3.2: bytes=32 time=21ms TTL=254
Ping statistics for 192.168.3.2:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 21ms, Maximum = 21ms, Average = 21ms
Control-C
PC01>ping 192.168.2.1
Pinging 192.168.2.1 with 32 bytes of data:
Reply from 192.168.2.1: bytes=32 time=19ms TTL=254
Ping statistics for 192.168.2.1:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 19ms, Maximum = 19ms, Average = 19ms
Control-C
PC01>ping 192.168.2.101
Pinging 192.168.2.101 with 32 bytes of data:
Reply from 192.168.2.101: bytes=32 time=35ms TTL=126
Ping statistics for 192.168.2.101:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 35ms, Maximum = 35ms, Average = 35ms
Control-C
关键词标签:路由器,静态路由配置
相关阅读
热门文章 路由器地址大全-各品牌路由设置地址各品牌的ADSL与路由器出厂默认IP、帐号、密Nslookup命令详解-域名DNS诊断站长装备:十大网站管理员服务器工具软件
人气排行 各品牌的ADSL与路由器出厂默认IP、帐号、密码路由器地址大全-各品牌路由设置地址腾达路由器怎么设置?腾达路由器设置教程ADSL双线负载均衡设置详细图文教程路由表说明(详解route print)网管员实际工作的一天用此方法让2M带宽下载速度达到250K/S左右网管必会!了解交换机控制端口流量
查看所有0条评论>>